Xerox DocuMate 5445 User Manual

Also see for DocuMate 5445: User guide User guide

Contents

Welcome Xerox® DocuMate ® 5445 / 5460User Guide 5Control Panel1. LED number—shows the OneTouch function that will be used for scanning. You can view thescan settings for that function in the OneTouch Properties window. When there is a hardwareerror, the LED number indicates what the hardware error code is.2. LED function button—tap the button to cycle through the 9 OneTouch scanning options.3. Scan type function button—tap the button to change the scan type between Simplex (one-sided) and Duplex (two-sided) scanning. The option you select here overrides the selectedoption in the OneTouch Properties window when you scan by pressing the green start button.4. Power button—turns the scanner power on or off. Press the button to turn the scanner on.Press and hold down the button for a couple of seconds to turn the scanner off. This is theclear button on the control panel.5. Reset button—returns the scan settings in TWAIN to the default settings. This is the yellowbutton on the control panel.6. Stop button—stops the scanner when scanning. This is the red button on the control panel.7. Start button—starts scanning. This is the green button on the control panel.8. Error light—this light will start flashing if the scanner experiences a hardware error.23456781