Xerox DocuPrint 100 Supplementary Manual

Also see for Docuprint 75: Getting started Software guide Planning guide Software guide Operator's guide

Xerox DocuPrint 100 Supplementary Manual Manual pdf 28 page image

Managing and printing jobs from the Tape Client2-4 Tape Client Job Submission GuideSaving a tapeclient setupYou can save a tape client setup including the following areas ofthe Tape Client window:• Input Device• Output Control• End of Job• DocumentTo save a tape client setup:• Click Save Setup in the Job Setup area to save the setupunder its current name, or• Click Save As... in the Job Setup area to save the setupunder a new name.To delete a tape client setup, click Delete.Preparing to print a tape jobThis section describes tasks that you perform to access the TapeClient and set up a tape job for printing.NOTE: The parameters that you specify on the Tape Clientwindow override the settings of the queue to which the job issent.Importing resource filesIn order to print a job from tape, the resources (forms, fonts,JDLs, JDEs, etc.) that are required by the job must be loaded inthe “lcds” resources folder on the DP 2000 Series EPS systemdisk. If any of the resources that are needed for your job aremissing from this folder, you must import them from the media onwhich they reside (diskette, tape, or another folder in the UNIXfile system on the DP EPS controller). To import resource files tothe “lcds” folder:1. Click Administration on the DocuSP Print Services window.2. Click the Lcds Resources tab to display the list of resourcesthat are currently in the “lcds” folder.