Xerox DocuPrint 180 Product Manual

Also see for DocuPrint 180: Message guide Quick reference card Quick reference card System guide Getting started

Contents

Xerox DocuPrint 180 Product Manual Manual pdf 57 page image

PRODUCT DIFFERENCES/USER CONSIDERATIONSXEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE 5-3Using your Xerox DocuPrint 180 LPS as a backup LPSTables 5-1 through 5-6 identify particular job features to considerwhen printing a job on your Xerox DocuPrint 180 LPS which wascreated on another Xerox LPS running a different software version.Each table contains specific job features which may be encountered,the projected results when printed on your Xerox DocuPrint 180 LPS,and where to find further information.Table 5-1. Will this 4635 (V3A R1.7) job print on my XeroxDocuPrint 180 LPSJob features from 4635(V3A2 R1.7) Results when run on DP 180 LPSProgrammable bypasstransportJob prints if DP 180 LPS has a bypasstransport and the finishing device isrequired by the job. Otherwise, it doesnot run.Clusters Job prints. Operator needs to redefineclusters if trays differ.Edgemarking Job printsFonts Job prints if the fonts and character setsused are loaded on the DocuPrint 180LPS or if substi-tutions for these fontsare defined.Graphics Job prints if sufficient graphic memory isavailable.Labels Job prints using only paper labels. Referto theXerox DP 180 LPS OperatorGuide for loading instructions.Page density Job prints.Paper sizes Job prints.Paper stock Job prints if it does not use edgereinforced 3-hole stock.Stitch commands No stitcher available on DP 180 LPS,therefore stitch commands are ignoredand job prints unstitched.Transparencies Job prints.MICR A message will appear stating that thesystem is not configured for this feature.Bar Code A message will appear stating that thesystem is not configured for this feature.Interpress A message will appear stating that thesystem is not configured for this feature.XNS A message will appear stating that thesystem is not configured for this feature.Ethernet A message will appear stating that thesystem is not configured for this feature.