Network printing environmentSystem Overview Guide 4-5Job status feedbackClient workstations display fault messages and additionalinformation, such as the status of feeder trays and output bins. Ifproperly configured, the workstations may be able to display jobstatus, as shown below.To determine the status of jobs submitted using the lprcommand, you must issue an lpq command at the command line.Some application software packages may provide a simplifiedmeans of obtaining job status, such as through the use of icons.AppleMacintoshApple OS OptionalEthernetinterfaceAppleTalk usingEtherTalk Phase I orII; nonePrint directly fromapplication or use XeroxDocuPrint PrintSubmission Clientsoftware for theMacintosh.IBM RS/6000 IBM AIX Standard TCP/IP;nonePrint using Xerox ClientSoftware.HP/Apollo HP-UX Standard TCP/IP;nonePrint using Xerox ClientSoftware.Table 4-1. Clients (Continued)ClientworkstationhardwareOperatingsystemEthernetconnectionProtocol;TranslationrequirementsJob submissionmethodTable 4-2. Job status feedbackPlatform Job status capabilitySun workstation Job status and job deletion are available by issuing the appropriatecommand at the command line.Job status information is available for jobs submitted using Xerox ClientSoftware.IBM and compatiblepersonal computersJob status and job deletion are available depending on the TCP/IPsoftware installed on the workstation. You must issue the appropriatecommand at the command line.Job status information is available for jobs submitted using Xerox ClientSoftware.Job status information is available using the Novell PCONSOLE utility ifthe printer is configured with a RPRINTER or PSERVER enabled.Apple Macintosh Job status information is available at the workstation through AppleTalk.IBM RS/6000 and HP/ApolloJob status information is available for jobs submitted using Xerox ClientSoftware or Ipstat (native utility).