60 5 Troubleshooting5 Troubleshooting5.1 When Paper JamsIf a paper jam occurs, refer to the illustration below to select the appropriate correctiveaction and clear the paper jam immediately.Note• The illustration below shows the printer with the optional 550 Sheet Feeder and1100 Sheet Feeder areinstalled.CAUTION• When removing jammed paper, make sure that no pieces of torn paper are left in themachine. A piece of paper remaining in the machine can cause fire. If a sheet of paper iswrapped around the heat roller, or when clearing a jammed paper that is difficult orimpossible to see, do not try to remove it by yourself. Doing so can cause injuries orburns. Switch off the machine immediately, and contact our Customer Support Center oryour dealers.• The fuser unit, and the surrounding area are hot. You may get burnt if you touch itdirectly.Paper Jams in the Bypass TrayFollow the procedure below to remove paper jammed in the bypass tray.1. Pull the jammed paper out of the bypasstray, and remove any remaining paper fromthe bypass tray.“Paper Jams at the PaperInverter” (P. 66)“Paper Jams in the BypassTray” (P. 60)“Paper Jams at the FuserUnit” (P. 63)“Paper Jams in theOptional Sheet Feeder”(P. 66)“Paper Jams Between theDrum Cartridge and FuserUnit” (P. 62)“Paper Jams in the PaperTray” (P. 61)
