User safety summaryYour printer and the recommended consumable supplies have been designed and testedto meet strict safety requirements. Attention to the following notes will ensure thecontinued safe operation of your printer.Electrical Safety Use the power cord supplied with your printer. Do not use a ground adapter plug to connect the printer to a power sourcereceptacle that lacks a ground connection terminal. Plug the power cord directly into a properly grounded electrical outlet. Do not usean extension cord. If you do not know whether an outlet is grounded, ask anelectrician to check the outlet.WarningAvoid the potential of severe electrical shock by ensuring the printer isproperly grounded. Do not place the printer where people may step on the power cord. Do not place objects on the power cord. Do not obstruct the ventilation openings. These openings are provided to preventoverheating of the printer.WarningDo not push objects into slots and openings on the printer. Making a contactwith a voltage point or shorting out a part could result in fire or electricalshock. If you notice unusual noises or odors, switch off the printer power immediately.Disconnect the power cord from the electrical outlet. Call an authorized servicerepresentative to correct the problem. The power cord is attached to the printer as a plug-in device at the back of theprinter. In the event it is necessary to remove all electrical power from the printer,disconnect the power cord from the power receptacle.