Xerox DocuPrint t 180 System Generation Manual

Also see for DocuPrint 180: Message guide Quick reference card Quick reference card System guide Getting started

Xerox DocuPrint t 180 System Generation Manual Manual pdf 21 page image

XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE 3-13. 3Sample system configurationsUse the information provided in this chapter to select yourconfiguration specifications.Stages of the sysgen process An overview description of the sysgen process is shown in Table 3-1.Table 3-1. Sysgen processStage Description1 You start the sysgen process.2 The LPS displays system configuration information on thescreen in a format similar to the illustration in Table 3-2. Theitems differ depending upon your system components andthe version of software you are using.3 The system asks you if you want to make changes to theconfiguration.4 You answer “yes.”5 The LPS displays the Configuration Options menu.6 You enter the number of a listed option to select or deselecta feature. For some options, a further list of suboptionsdisplays.7 The system incorporates the software for each feature youselect into the operating system, and creates aconfiguration file (DISPCF.SYS).Note: The printing system must have the appropriatehardware installed to support the features specified.Selecting uninstalled features may result in anunsuccessful sysgen, an unusable system, or both.8 You can modify the configuration file by using the minisysgen procedure to deactivate or reactivate a feature.9 Once your system is configured successfully, you can geta copy of the configuration information by printing thecustomer billing report. Refer to theDocuPrint 180 LPSOperations Reference for further details. This configurationinformation assists you in recreating your basic systemconfiguration during a full sysgen.