Xerox DocuTech 128 Planning Manual

Also see for Nuvera 100: System guide Getting started Install guide Software guide Planning guide

Xerox DocuTech 128 Planning Manual Manual pdf 22 page image

C.P. Bourg Document Finisher (BDFx)Limitations• Due to the height of the bypass transport on DocuTech 1xxHLC it is not possible to attach the BCFx without the BSR.• Requires a minimum of 2 skipped pitches (3 skipped pitcheswith BCF), which results in low productivity with smallbooklets. (A3/ 11 x 17 requires only one skipped pitch with orwithout the BCF.)• The BDFx can only be guaranteed to work to its maximumbook thickness when feeding (8.5 x 11 / A4) paper if thepaperweight is 90 gsm or less. (Long grain paper with aweight above 90 gsm should be tested with the customerpaper and application before selling the BDFx.)• Use of short grain paper is highly recommended for 11 x 17”/ A3 sized paper.System Dependencies and PrerequisitesListed below are the dependencies and prerequisites forinstalling the BDFx, BCFx and SQEDG module.• The printer must be equipped with a Bypass Transport toenable In-line Finishing.• It is highly recommended that the printer is equipped with aBourg Sheet Rotator (BSR) to maximize output.• Due to the height of the bypass transport on DocuTech 1xxHLC it is not possible to attach the BCFx without the BSR.• Requires a minimum of 2 skipped pitches (3 skipped pitcheswith BCF), which results in low productivity with smallbooklets. (A3/ 11 x 17 requires only one skipped pitch with orwithout the BCF.)3-2