General Procedures/InformationFaxCentre F116/F116L 9/04 6-53Paper Feeding System 2-way system (Maximum 3-way)*2Main Paper Tray/Multi-purpose Tray (plain paper: 250sheets)Manual Feed Tray (1 sheet)Second Paper Cassette Unit (plain paper (A4/Letteronly): 500 sheets)*2: Expandable to 3-way system when the optional Sec-ond Paper Cassette Unit is installed.Paper Exit System Face down (maximum: 100 sheets)Drum Charging System Bias charge roll (BCR) and pre-charge film systemDeveloping System Single element developing systemFMT (Fine Micro Toning) systemDensity Control Developing bias adjusting systemImage Transfer System Bias Transfer Roll systemPC Drum OPC (Organic Photoconductor)Drum Cleaning System Non-cleaner systemPaper Separating System Curvature separating system and charge neutralizing pinFusing System Heated roller systemDimensionsWidth:15.3 in (389 mm)Depth:17.1 in (435 mm)Height:10.4 in (263 mm)(Closing the Face-down Tray)Weight Approximately 15.4 lbs (7.0 kg)(without cartridges)Drum Cartridge: approx. 0.66 lbs (0.3 kg)Toner Cartridge: approx. 1.1 lbs (0.5 kg)Power Supply Voltage AC100 V ± 10%,AC110-127 V (AC110 V - 10%, AC127 V + 6%),AC220-240 V ± 10%Frequency 50/60 Hz ± 3 HzPower ConsumptionOperating: 810 W or less (100 V area),840 W or less (120 V area),850 W or less (220-240 V area)Continuation printing (average): 370 W or lessStandby (fuser off): 15 W or lessStandby (fuser on): 75 W or less (average)Standby (sleep): 15 W or lessAcoustic noise Printing: 67 dB or less*3