Xerox Nuvera 100 Hints And Tips Manual

Also see for Nuvera 100: System guide Getting started Install guide Software guide Planning guide

Contents

Xerox Nuvera 100 Hints And Tips Manual Manual pdf 13 page image

Xerox Nuvera Release IssuesIssues remaining from previous releaseCQ#43933 Unable to Eject CD TrayDescriptionCustomer is unable to eject CD tray from GUI or CD-ROM button and unable to read CD. Thisstops working after the first successful eject.Workaround1. Insert Media in Tray using "Hard Button" in the CD Tray.2. If the Pop-Up Menu doesn't show up, go to Print from File Button and select "Browse".3. Press "Re-display" to show the pop-up menu. (At this point, we may see "No disk in drive"and it can be ignored.)4. Do any further operation related to CD/DVD.5. After completion of Media operation, use only "Soft eject in the UI" to eject the CD.CQ#45919 Tray Programming Reverts to Default SettingsDescriptionWhen 'After Every Tray Cycle' tray confirmation is enabled, and a tray is cycled, all trayprogramming, except for Stock Size, in the pop-up confirmation window is set to default.WorkaroundIf you are using named stock or stock weight different than the queue default weight then it isrecommended that you set [System Preferences -> Stocks and Trays -> Tray Confirmation] to‘None’. If you do not, then each time the tray confirmation pop-up window opens all thevalues will be set to the queue default values.CQ#45544 Build JobDescription11x17 and 8 1/2x14 build jobs are printing with second segment as 8.5x11 instead of 11x17.WorkaroundWhen using Build Job, please leave the paper selection set to APS before entering Build Job.Once you are in Build Job you can change the paper selection to any stock you wish. You alsocan leave it set to APS.CQ#43471 Skewed Inserts with Xerox Tape BinderDescriptionBooks printed on 60gsm paper that have heavy (90gsm and higher) inserts can cause lastseveral pages in the book to be skewed.Hints and Tips Guide 3-3