Xerox Nuvera Digital Production System Paper Manual

Contents

X er o x N u v er a P a p er G u id e C-1M an ag i n g th e f e ed mo d ul e sC. Managing the feed modulesFeeder proceduresThe paper trays can either be programmed then loaded or loadedthen programmed.For more information, see the Configuring Paper Stocks and TraySettings section of the Xerox Nuvera User Guide and Training AidFrom the Printer Manager, click on the Paper Trays tab for a list ofpaper trays and information about individual trays, includingwhether the tray is active or inactive, how much stock is in the tray,and which stock is assigned to the tray.CAUTION: An incorrect value for any stock attribute can causefaults or unacceptable image quality.NOTE: Paper tray programming for the Inserter is the same as forthe Feeder. Refer to Inserter procedures for specific instructions.Add stock to a tray directly from the Stock Library window1. Open the Stock Library tab.2. Select the stock to be assigned to a feeder tray. The table rowis highlighted.3. Select [Stock: Add to Trays].4. Select the destination tray.5. Select [OK].6. Load the stock in paper tray.Copy stock attributes from one tray to another1. Open the Paper Trays tab.2. Select the stock you wish to copy.3. Select [Save Settings] from the Tray pull-down menu.4. Enter the information in the Save Tray Setting window.5. Select [OK].6. Select the tray into which you want to place the saved stock.7. Select [Load Settings] from the Tray pull-down menu.