Xerox Phase 6200 Maintenance Instructions Manual

Contents

Phaser® 6200 Color Laser PrinterCopyright © 2002 Xerox Corporation. All Rights Reserved. 14Regular Printer MaintenanceYour printer needs little maintenance other than periodic cleaning of the density sensor and replacingthe following Customer-Replaceable Consumables (CRCs) and Customer-Replaceable Units (CRUs): Toner cartridges (black, cyan, magenta and yellow) — see page 17 Imaging unit — see page 18 Transfer roller — see page 23 Fuser — see page 20 Feed rollers — see page 25Order extra printer supplies when the printer’s front panel displays a warning that the consumable islow or near the end of its life. You must replace the consumable when the front panel displays an errormessage that the consumable is empty or at the end of its life. For part number information, refer to theSupplies section of the Support Guide on the Interactive Documentation CD-ROM. To orderconsumables and other supplies, visit the Phaser® 6200 Supplies and Accessories web site. Each itemincludes installation instructions in the package.CautionKeep the imaging unit out of direct sunlight. Otherwise, faded images, light areas or darkbands may result. Do not place the printer near vents or dust-producing equipment.WarningDo not burn the old toner cartridges, the imaging unit, the transfer roller, or the fuser.Cleaning the outside of the printerYou can clean the outside of the printer with a soft, damp well-wrung cloth. You can use a clothmoistened with a mild neutral detergent to remove stains; do not spray detergent directly onto theprinter.WarningTo prevent electric shock, turn the printer off and unplug the power cord before cleaning theprinter.CautionDo not use a vacuum cleaner to clean the printer. Do not lubricate the printer with oil.