Xerox Phaser 2135 Install Manual

Also see for Phaser 2135: Quick reference guide User guide Advanced features and troubleshooting guide Quick start guide Specifications

Xerox Phaser 2135 Install Manual Manual pdf 14 page image

14 Phaser 2135 Color PrinterQuick install steps (SMB protocol)1. Type your printer’s IP Address in your web browser.2. Select Properties to view and set properties.3. In the tree to the left, expand the Protocols folder by clicking the +sign.4. Select SMB TCP/IP; the SMB over TCP/IP dialog box shouldappear.5. Make sure that Enable is check-marked.6. Enter Server Name, Workgroup, and Auto Config information.7. Press the Apply New Properties button.8. Restart your printer.9. Use Network Neighborhood to find your printer with theWorkgroup you entered in Step 6. Look for a PC icon with theServer Name you entered in Step 6.10. Double-click the PC icon found in Step 9.11. Right-click the Shared Network Printer icon (icon with a printerand a LAN wire below it). Select Connect from the menu.12. If the printer driver was not previously installed on yourworkstation, follow the instructions in the Add Printer Wizard toinstall the driver.Quick install steps (AppleTalk protocol) —Windows 2000 only1. At the Desktop, right-mouse-click the My Network Place icon andselect Properties.2. Right-click the Local Area Connection icon inside the Networkand Dial-up Connections window. Select Properties.3. Select the General tab, and verify that AppleTalk Protocol isloaded.4. If the AppleTalk software is not present, install it using thedocumentation provided by Microsoft. Then return to thisdocument.5. Open the Control Panel and double-click the Printers icon.