Xerox Phaser 340 Cleaning

Also see for PHASER 340: Setup guide User manual Supplementary guide Instructions CLEANING

Cleaning for media tray jams: media pick rollersApproximate time to complete: 5 minutesIf you are experiencing media feeding problems including mispicks andmultiple picks at the standard (upper) media tray, you can generally correctthe problem by cleaning the media-pick rollers and the media pick pad withisopropyl alcohol.The printer guides you through the necessary steps to perform cleaning.You will need the pick roller cleaning tray included in the cleaning kit whenyou run the Clean: Media Tray Jams routine from the printer’s frontpanel.Note Media picking problems can also occur when the maintenancetray is not properly latched. You may need to remove and re-latchthe maintenance tray to cure a media picking problem. Refer tothe information on replacing the maintenance tray for detailedinstructions.1. When the printer is on and the Ready message appears, press theClean button. The printer displays the first selection in the menu:Clean:Light Stripes<---- Clean Test2. Press the left arrow(<---) button until the following messageappears:Clean:Media Tray Jams<---- Clean Test3. Press the Clean button once again.4. The following message appears:Print Instructions?Continue Print

/ 5

Related manuals for Xerox PHASER 340