Xerox Phaser 340 Cleaning

Also see for PHASER 340: Setup guide User manual Supplementary guide CLEANING Instructions

Cleaning for light stripes: printheadApproximate time to complete: 3-10 minutesIf your prints have 1/10 in. (2.5 mm) lengthwise stripes that are the wrongcolor or have missing colors, you can correct the problem by cleaning theprinthead. The printer automatically executes a printhead cleaningsequence when you run the Clean:Light Stripes routine from the frontpanel.1. When the printer is on and the Ready message appears, press theClean button. The printer displays the first selection in the menu:Clean:Light Stripes<---- Clean Test2. Press the Clean button once again.3. A series of front panel messages indicate the condition of theprinter as it progresses through a sequence of automatic cleaningroutines. The printer outputs a cleaning page at the end of thecleaning sequence that you may discard as normal office waste.4. When the cleaning sequence is completed, the printer displays thefollowing message:Clean:Light Stripes<---- Clean Test9101-48A

/ 3

Related manuals for Xerox PHASER 340