General Procedures and InformationPhaser 3435 5/08 6-15GP 3 Mechanical Parts SpecificationsFrame• Material: PC + ABS V0 NH-1000T(Cheil Industries)• Weight: 1.0kgFeeding Part• Feeding Type: Universal Cassette Type• Feeding Standard: Centre Loading• Feeding Qty: Cassette 250 sheets (75g/20Ib paper standard) MPF 50 sheets (75g/20Ib paperstandard) Special Media 5 sheets in MPF (OHP, Envelope, Label, Post Card, Index Paperetc.)• Separating Type: Cassette-Friction Pad Type MPF-Friction Pad Type• Driver Type: Driving by Gearing from Main Motor• Pick Up Roller Driver: Solenoid• Pick Up Roller Rubber Material: EPDM + IR = 1.6 or more• Paper detecting Sensor: Photo Sensor• Paper Size Sensor: None• Paper Separating Pad Material: NBB 52 = 0.8~1.2• Separating Pad Pressure: 190gf• Feeding Pressure (Cassette): 250 gf 10% (SPRING H mm, based on 1 sheet 320 gf 10%(SPRING H mm, based on 250 sheet)• Paper Exit Type: Face Down• Feed Roller Driver: SolenoidTransfer AssemblyIt is consisted of PTL (pre-transfer lamp) and Transfer Roller. The PTL sends a light to the OPCdrum, makes the current on the drum surface to low, and improve the transfer efficiency.The trans-fer roller delivers the toner of the OPC drum to the paper• TR Voltage: +1.3KV +/-5%-1.20KV +/-10% (In cleaning)• Transfer Trigger Current: 6.5 micro amps +/- 5%• Transfer Efficiency: 85% or more (All environment: preferable media)• Voltage System: Voltage PWM Control System• Transfer Roller-Material: NBR FOAM ROLL-Structure: Mono layer-Resistance: 3E +07 ~ 8E +07 ohms (N/N)- Hardness: 40 3% (ASKER-C)-Valid length: 224.2 +0.5/-0mm- OD: 15.0 +/-0.5mm-SHAFT Material: SUM -24L + Non-electrolysis Ni. Coating• Life Span: Print over 70,000 sheets (in 15~30 degrees C)
