Xerox Phaser 3450 Service Manual

Also see for Phaser 3450: Reference guide Service manual Reviewer's guide Supplementary guide Service manual

Contents

Xerox Phaser 3450 Service Manual Manual pdf 29 page image

555-1Disassembly and ReassemblyService Manual5. Disassembly and Reassembly5.1 General Precautions on DisassemblyWhen you disassemble and reassemble compo-nents, you must use extreme caution. The closeproximity of cables to moving parts makes properrouting a must.If components are removed, any cables disturbedby the procedure must be restored as close aspossible to their original positions. Before remov-ing any component from the machine, note thecable routing that will be affected.Whenever servicing the machine, youmust perform as follows:1. Check to verify that documents are not storedin memory.2. Be sure to remove the toner cartridge beforeyou disassemble parts.3. Unplug the power cord.4. Use a flat and clean surface.5. Replace only with authorized components.6. Do not force plastic-material components.7. Make sure all components are in their properposition.Releasing Plastic LatchesMany of the parts are held in place with plasticlatches. The latches break easily; release themcarefully.To remove such parts, press the hook end of thelatch away from the part to which it is latched.