Xerox Phaser 3500 User Manual

Also see for 3500B - Phaser B/W Laser Printer: Compatibility guide Evaluator guide Evaluator guide Benutzerhandbuch

Contents

Xerox Phaser 3500 User Manual Manual pdf 40 page image

Overview of Network Setup and ConfigurationPhaser® 3500 Laser Printer35Connections and NetworksOverview of Network Setup and ConfigurationTo set up and configure the network:1. Turn on the printer and the computer.2. Connect the printer to the network using the recommended hardware and cables.3. Configure the printer’s network address, which is required to identify the printer on thenetwork. Windows operating systems: Run the Installer on the Software and DocumentationCD-ROM to automatically set the printer’s IP address if the printer is connected to anestablished TCP/IP network. You can also manually set the printer’s IP address on thecontrol panel. Macintosh systems: Manually set the printer’s network address (for TCP/IP) on thecontrol panel.4. Install the driver software on the computer from the Software and DocumentationCD-ROM. For information on driver installation, see the section in this chapter for thespecific operating system you are using.NoteIf the Software and Documentation CD-ROM is not available, you can download the latestdriver at www.xerox.com/office/drivers.Choosing a Connection MethodConnect the printer to the network via Ethernet or USB. Hardware and cabling requirementsvary for the different connection methods. Cabling and hardware are generally not includedwith your printer and must be purchased separately.Connecting via EthernetEthernet can be used for one or more computers. It supports many printers and systems on anEthernet network. It also allows you direct access to CentreWare Internet Services (IS).CentreWare IS provides a simple interface that enables you to manage, configure, and monitornetworked printers from your desktop using an embedded web server. For completeinformation about CentreWare IS, click the Help button in CentreWare IS to go to theCentreWare IS Online Help.