Xerox Phaser 5335 Printing Manual

Also see for Phaser 5335: Specifications User guide Installation guide Installation guide

Xerox Phaser 5335 Printing Manual Manual pdf 69 page image

Setting the PCL Mode 57Setting the PCL Mode MenuThis section explains the items in the PCL mode menu and how to configure them.PCL Mode Menu ItemsThe items that can be set in the PCL mode menu are as follows:Paper TraySets the paper tray to be used when printing.The following options are available:[Auto] (default)When [Auto] is selected, the printer searches for the paper tray that contains thepaper that matches the [Output Size] setting and automatically feeds paper fromthat paper tray.[Tray 1] (Bypass Tray)[Tray 2] (default)[Tray 3][Tray 4][Tray 5]NOTE: When [Auto] is selected, and if the paper of the same size is loaded in more thanone paper tray, the printer selects a tray based on the tray priority setting of a commonmenu.[Tray 3] - [Tray 5] are displayed only if the 550 sheet feeders (optional) are installed.Output SizeSets the size of the paper to be used when printing.The following options are available:[A4] (default)[A3], [A5], [B4], [B5][8.5 x 11], [8.5 x 13], [8.5 x 14], [11 x 17], [5.5 x 8.5], [7.25 x 10.5][Env 3.9 x 7.5], [Env 4.1 x 9.5], [Env 110 x 220mm], [Env 162 x 229mm][100 x 148mm], [148 x 200 mm], [Env 120 x 235 mm], [Env 105 x 235 mm][Custom]When [Custom] is selected, set the print orientation to [Portrait (Y)] or [Landscape(X)].OrientationSets the print orientation to [Portrait] (default) or [Landscape].2 SidedSets whether or not to print 2 sided by selecting [On] or [Off] (default).When [On] is selected, set the binding orientation to [Flip Long Edge] (default) or[Flip Short Edge].NOTE: This item appears only when the duplex unit (optional) is installed.FontSets the font to be used when printing. The default is [Courier].