Operational SafetyPhaser® 5550 Printer1-7Operational Guidelines■ Do not block or cover the slots and openings on the printer. The printer may overheatwithout adequate ventilation.■ For optimum performance, use the printer at elevations below 3,000 m (11,480 ft.).■ Do not place the printer near a heat source.■ Do not place the printer in direct sunlight.■ Do not place the printer in line with the cold air flow from an air conditioning system.■ Place the printer on a level, solid non-vibrating surface with adequate strength for theweight of the printer. It should be within 2° of horizontal with all four feet in solid contactwith the surface. The base printer weight without any packaging materials isapproximately 41 kg (90 lb.).Printing Safety Guidelines■ Wait 10 to 15 seconds between turning the printer off and on.■ Keep hands, hair, neckties, etc. away from the exit and feed rollers.■ Do not remove the paper source tray that you selected in either the printer driver or controlpanel.■ Do not open the doors.■ Do not move the printer.Warning: Avoid touching areas inside the printer that are labeled with a warning symbol.These areas may be very hot and can cause personal injury.Printer Supplies■ Use the supplies specifically designed for your printer. The use of unsuitable materialsmay cause poor performance and a possible safety hazard.■ Follow all warnings and instructions marked on, or supplied with, the printer, options andsupplies.
