Overview of Network Setup and ConfigurationPhaser® 6300/6350 Color Laser Printer2-2Overview of Network Setup and ConfigurationTo set up and configure the network:1. Turn on the printer and the computer.2. Connect the printer to the network using the recommended hardware and cables.3. Configure the printer’s network address, which is required to identify the printer on thenetwork.■ Windows operating systems: Run the Installer on the Software and DocumentationCD-ROM to automatically set the printer’s IP address if the printer is connected to anestablished TCP/IP network. You can also manually set the printer’s IP address on thecontrol panel.■ Macintosh systems: Manually set the printer’s network address (for TCP/IP) on thecontrol panel.4. Install the driver software on the computer from the Software and DocumentationCD-ROM. For information on driver installation, see the section in this chapter for thespecific operating system you are using.
