Configuring the Network AddressPhaser® 8500/8550 Color Printer2-6Dynamic Methods of Setting the Printer’s IP AddressSet the printer’s IP address using any of the following methods. DHCP is enabled by default onall Phaser printers.■ DHCP■ CentreWare IS■ AutoIPEnabling DHCP on the PrinterVerify that the printer DHCP protocol is enabled by setting the control panel or by usingCentreWare IS. DHCP is enabled by default on all Phaser printers.Note: To determine the printer’s IP address, select Printer Identification on the controlpanel.See also:Control Panel Features on page 1-6Information Required for Manual IP AddressingInformation CommentsInternet Protocol (IP) address of the printer Format is xxx.xxx.xxx.xxx, where xxx representsa decimal number from 0–255.Network Mask If you are unsure, leave this blank; the printerchooses an appropriate mask.Default Router/Gateway address Router address is required to communicate withthe host device from anywhere other than thelocal network segment.
