Xerox Phaser 8510MFP Advanced Features Manual

Also see for Phaser 8510MFP: Supplementary guide User guide

Contents

Xerox Phaser 8510MFP Advanced Features Manual Manual pdf 55 page image

MacintoshPhaser® 8510/8560MFP Multifunction Product3-18Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version10.2 and HigherVerify that you are running Mac OS X, version 10.2 or higher. The previous versions ofMac OS X do not fully support PostScript printing and printer features.Setting Up the Macintosh Ethernet Port for TCP/IPTo set up your Macintosh for TCP/IP:1. Select Network from the System Preferences application.2. Select Built-In Ethernet from the Show menu.3. Specify how you will obtain the IP address from the TCP/IP tab:■ Manually: Specify the IP address, Subnet Mask, Router Address, and Name ServerAddress in the dialog box.■ Using DHCP: Automatically finds the IP address.4. Click Apply, and then close the dialog box.See also:Knowledge Base at www.xerox.com/office/8510_8560supportSetting Up the Macintosh Ethernet Port for AppleTalkTo set up your Macintosh for AppleTalk:1. Select Network from the System Preferences application.2. Select Built-In Ethernet from the Show menu.3. Select Make AppleTalk Active in the AppleTalk tab.4. Click Apply, and then close the dialog box.Creating an LPR System with Mac OS X, Version 10.2 and HigherTo create an LPR printer:1. Open the Print Center utility. In Mac OS X, version 10.3 or higher, open the PrinterSetup Utility. The utility is located in a directory called Utilities in the Applicationsdirectory.2. Select Add, then select one of the following options:■ Version 10.2: Select IP Printing from the pull-down menu.■ Version 10.3 and higher: Select LPD/LPR in the Printer Type field.3. Enter the system’s IP address in the Printer Address field.4. Select the appropriate PPD from the list in the Printer Model pull-down list. If yoursystem PPD is not listed, install it from the Software and Documentation CD-ROM.5. Click Add to complete the configuration.