Printing on Specialty MediaPhaser® 8560 Color Printer3-29Printing on Specialty MediaThis section includes:■ Printing Transparencies on page 3-29■ Printing Envelopes on page 3-36■ Printing Labels on page 3-43■ Printing Glossy Paper on page 3-49■ Printing Custom Size Paper on page 3-55Printing TransparenciesTransparencies can be printed from any tray. They should be printed on one side only. Useonly recommended Xerox transparency film.To order paper, transparencies, or other specialty media, contact your local reseller or go towww.xerox.com/office/8560Psupplies.Caution: Damage caused by using unsupported paper, transparencies, and other specialtymedia is not covered by the Xerox warranty, service agreement, or Total SatisfactionGuarantee. The Total Satisfaction Guarantee is available in the United States and Canada.Coverage may vary outside these areas; please contact your local representative for details.See also:Recommended Media List (United States)Recommended Media List (Europe)Guidelines■ Remove all paper before loading transparencies in the tray.■ Handle transparencies by the edges using both hands. Fingerprints or creases can causepoor print quality.■ Do not load more than 50 transparencies in Tray 1. Do not load more than 400transparencies in Trays 2-4. Overloading the tray can cause the printer to jam.■ Do not use transparencies with stripes on the side.■ After loading transparencies, change the paper type at the control panel (Printer Setup/Paper Handling Setup).
