Xerox Phaser 8560 User Manual

Also see for Phaser 8560: System administrator guide Service manual User manual User guide Installation guide

Contents

Xerox Phaser 8560 User Manual Manual pdf 59 page image

Printing on Specialty MediaPhaser® 8560/8860 Printer3-31Printing on Specialty MediaThis section includes:■ Printing Transparencies on page 3-31■ Printing Envelopes on page 3-38■ Printing Labels on page 3-45■ Printing Glossy Paper on page 3-51■ Printing Custom Size Paper on page 3-57Printing TransparenciesTransparencies can be printed from any tray. They should be printed on one side only. Useonly recommended Xerox transparency film.To order paper, transparencies, or other specialty media, contact your local reseller or go to theXerox Supplies website for your printer:■ www.xerox.com/office/8560Psupplies (Phaser 8560 printer)■ www.xerox.com/office/8860supplies (Phaser 8860 printer)Caution: Damage caused by using unsupported paper, transparencies, and other specialtymedia is not covered by the Xerox warranty, service agreement, or Total SatisfactionGuarantee. The Total Satisfaction Guarantee is available in the United States and Canada.Coverage may vary outside these areas; please contact your local representative for details.See also:For the Phaser 8560 printer:Recommended Media List (United States)Recommended Media List (Europe)For the Phaser 8860 printer:Recommended Media List (United States)Recommended Media List (Europe)Guidelines■ Remove all paper before loading transparencies in the tray.■ Handle transparencies by the edges using both hands. Fingerprints or creases can causepoor print quality.■ Do not load more than 50 transparencies in Tray 1. Do not load more than400 transparencies in Trays 2-4. Overloading the tray can cause the printer to jam.■ Do not use transparencies with stripes on the side.■ After loading transparencies, change the paper type at the control panel (Printer Setup/Paper Handling Setup).