September 20085-27WorkCentre 5687 Family PL 5.35Parts ListsPL 5.35 Input Tray AssemblyItem Part Description1 050K60430 Input tray assembly (complete) (32-38 ppm) (REP 5.4)2 004K00971 Pad3 031E08720 Restack arm– 031E11310 Restack arm (alternate)4 050E22922 Input tray5 423W00949 Feed motor drive belt (ADJ 5.1)6 059K50920 Takeaway roll assembly (32-38ppm) (REP 5.6), Exit roll assembly(32-87 ppm) (REP 5.13)7 125E00430 Static eliminator (small) (REP 5.17)8 130E11500 DADH Length sensor 1 (Q05-315)/DADH Length sensor 2 (Q05-320)(REP 5.9)– 130E12320 DADH Length sensor 1 (Q05-315)/DADH Length sensor 2 (Q05-320)(Alternate)9 – Lower cover (right) (P/O PL 5.35Item 18) (45-87 ppm)10 115K02540 Static eliminator (large)11 103K01511 Document width sensor (Q05-325)(REP 5.16, ADJ 5.3)12 – Bearing (P/O PL 5.35 Item 1, PL5.35 Item 18)13 014E61020 Spacer (black)14 – Spacer (white) (P/O PL 5.35 Item 1,PL 5.35 Item 18)15 – Pulley (P/O PL 5.35 Item 1, PL 5.35Item 18)16 – Sensor bracket (P/O PL 5.35 Item1, PL 5.35 Item 18)17 059K43920 Exit roll assembly (45-87 ppm)(REP 5.13)18 050K67464 Input tray assembly (complete) (45-87 ppm) (REP 5.14)19 130E11200 Document present sensor (Q05-310) (45-87 ppm)20 – Lower cover (Left) (P/O PL 5.35Item 18) (45-87 ppm)21 – Lower cover (P/O PL 5.35 Item 1)(32-38 ppm)NOTE: If a new part is installed into the input tray, or a newinput tray is installed, perform ADJ 5.3.www MK-Electronic de
