Xerox WorkCentre 490cx Online User's Manual

Also see for WorkCentre 490cx: User guide

Contents

54BOOK TOCCHAPTER TOCSEARCHPREVIOUS PAGE NEXT PAGESETTING AN OPTIONSetting an Option1. Press the Menu button.2. Press the 0 + 1 buttons on the keypad. Then press the Start button.The display shows the first option menu.3. Scroll through the options by pressing the Down or Up buttonsrepeatedly.4. When the option you want appears in the display, enter the number forthe desired setting.OrYou can use Left or Right buttons to select the desired setting.5. Press the Start button to store your choice in memory.You can exit from the System Data setup mode at any time by pressingthe Clear/Stop button. When you press the Clear/Stop button, themachine stores the options you changed and returns to the Standbymode.Selectable OptionsThese instructions assume you’ve followed the steps listed in the previousprocedure, Setting an Option, and the machine is prompting you to changeone of the options listed below.All of these options are menu settings accessed by the System Data (Pressthe Menu button, press the 0 + 1 buttons on the keypad. Then press theStart button).• PAPER SIZE - Select the paper size you will be printing on.Press 1 for letter (LTR), 2 for A4 size, or 3 to use legal (LGL) size paper.