Xerox WorkCentre 5050 Quick Reference Manual

Also see for WORKCENTRE 5030: Manual Installation guide Specifications Specifications Secure installation and operation

Contents

Quick Reference Guide Page 1-13WelcomeRegulatory InformationFCC Part 15This equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference when the equipment isoperated in a commercial environment. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interferences attheir own expense.Changes or modifications to this equipment not specifically approved by the XeroxCorporation may void the user’s authority to operate this equipment.WARNING:Shielded cables must be used with this equipment to maintaincompliance with FCC regulations.ICES-003This Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 duCanada.US Regulatory Information for the Fax Kit optionFax Send Header Requirements: The Telephone Consumer Protection Act of1991 makes it unlawful for any person to use a computer or other electronic device,including FAX machines, to send any message unless such message clearlycontains in a margin at the top or bottom of each transmitted page or on the firstpage of the transmission, the date and time it is sent and an identification of thebusiness or other entity, or other individual sending the message and the telephonenumber of the sending machine or such business, other entity, or individual. (Thetelephone number provided may not be a 900 number or any other number forwhich charges exceed local or long-distance transmission charges.) The countrylocation, telephone number identifying the machine, the header text information(business name), the send and receive behavior and dial type must be enteredwhen installing the Embedded Fax kit option. Refer to the System AdministrationCD (CD1) for further information on installing Embedded Fax and the Training andInformation CD (CD2) for information about the Transmit Header Print feature.