Xerox WorkCentre 7120 Reference Manual

Also see for WORKCENTRE 7120: Evaluator guide User guide Evaluator guide Specifications System administrator guide

Xerox WorkCentre 7120 Reference Manual Manual pdf 6 page image

dc10cc0466Customer Support Page 6BANNER SHEET (START SHEET)PJL@PJL SET JOBATTR= “@BANR=value”Where value is one of the following:START = start sheetDEVICE = depend on device settingOFF = no banner sheetCOPIESUse this command to specify the number of non-collated sets of a document in a print job.PJL PCL@PJL SET COPIES = int &l intXWhere int is 1 to 999.QUANTITYUse this command to specify the number of collated sets of a document in a print job.PJL@PJL SET QTY = intWhere int is 1 to 999.SIMPLEX / DUPLEX PRINTINGThis command specifies if a job is to print on one side or both sides of the sheet.PJL PCL@PJL SET DUPLEX = value1@PJL SET BINDING = value2&l int SWhere value1 is one of the following:ON = DuplexOFF = SimplexWhere value2 is one of the following:LONGEDGESHORTEDGE(value2 is used combined with value1=ON)Where int is one of the following:0 = simplex1 = Duplex Long Edge Binding2 = Duplex Short Edge Binding