Print Driver Installation for NetwarePlease refer to the System Administration Guide which came packaged with your newmachine for complete instructions on loading drivers for Netware.Print Driver Installation for Mac OS using EthertalkPrinter Type: LaserWriter 8Printer Name: Xerox WorkCentre C226PPD Installation & ConfigurationMac OS 8.6-9.x1. Insert the PS3 Expansion Kit CD Rom into machine2. Double-click the CDROM3. Double-click the Mac OS Folder4. Double Click the Installer icon5. Click Install button6. Software License Agreement appears, Click “Yes”7. Click Continue8. PPD is now installedSetup Printer 8.6-9.x1. Select Chooser from the Apple Menu2. Select the LaserWriter 8 Icon3. Select the AppleTalk zone for your network.4. Select the XC010228 printer and click Create5. Once installed, Select Configure and set the options for your printer.Mac OS X1. Insert the PS3 Expansion Kit CD Rom into machine2. Double-click the CDROM3. Double-click the Mac OS Folder4. Double-click the OS version5. Double Click the Installer icon and then Continue6. Software License Agreement appears, Click Yes7. Choose Hard Disk Location and select Continue8. Click Install button9. When message appear “The software was successfully installed”, select Close – YourPPD has been installed.Setup Printer for OS X1. Select Applications from the Go Menu2. Double-click the Utilities Folder3. Double-click the Print Center Icon4. Click Add, select AppleTalk followed by your AppleTalk zone name5. Select the name of your AppleTalk device for the WorkCentre C2266. PPD window will appear, select Xerox followed by the PPD7. Click the Add button8. Click the printer name in the Printer List window and select Show Info from thePrinters Menu.9. Select Installable Options10. Set the options for your printer11. Close the window, your printer is now configured.