Xerox WorkCentre M118 Quick Setup Manual

Also see for WorkCentre M118: User guide User manual Module guide Network guide Quick installation card

Contents

network connection

Xerox WorkCentre M118 Quick Setup Manual Manual pdf 1 page image

Xerox WorkCentre ® M118/M118iCopyright 2004 Xerox® Corporation. All rights reserved.1This guide includes instructions for:■ Navigating Display Screens on page 2■ Network Setup Using DHCP on page 2■ Network Setup Using a Static IP Address on page 3■ Verifying Network Setup Using CentreWare Internet Services (CentreWare IS) on page 4This setup guide provides instructions for connecting the Xerox WorkCentre M118/M118i on an EthernetTCP/IP network. It includes procedures for setting up the network connection using either of the followingmethods:■ DHCP: Use this method to allow a DHCP server to automatically assign an IP address. This is the factorydefault setting.■ Static IP address: Use this method to manually assign an IP address provided by the networkadministrator.NoteThe System Administrator Guide provides detailed instructions for setting up a network connection. If youare using Novell IPX, refer to the System Administrator Guide for setup procedures.Before You BeginBefore turning on the machine:■ Confirm that an existing operational network utilizing TCP/IP is available.■ Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernetport on the network.NoteThe RJ45 Ethernet cable is not supplied by Xerox.Network ConnectionQuick Setup Guide701P42575