Xerox WorkCentre Pro 255 Quick Install Manual

Also see for Document Centre 240 LP: Quick install Quick install Quick install

Xerox WorkCentre Pro 255 Quick Install Manual Manual pdf 1 page image

Page 1Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install CardXerox Document Centre 240/255/265 LP/STb) On the keypad enter 1111 or thecurrent password. Press the Enterbutton when finished. If your printer isan ST model press the Go to Toolsbutton, otherwise skip to the next step.c) The Touch Screen will be used for theremainder of the data entry.3. Enable Microsoft Network printing.a) Press the Connectivity and NetworkSetup button.b) At the next screen, press the NetworkSetup button.4. Enable the Protocol and Media.a) At the next screen, press theMicrosoft Networking button.b) At the next screen, press theTransport and Media button.c) At the next screen, press the Enablebutton to enable the Microsoft Networkprotocols.d) Once enabled the Physical Mediaportion of the screen will appear. Pressthe corresponding button to select oneof the following NetBEUI or Ethernet,NetBEUI/Token Ring. After makingyour selection press Save.5. Assign the Workgroup and Host Namesa) You will be returned to the previousscreen, press the Workgroup andHost button.b) At the next screen, press theWorkgroup Name button. Using theTouch Screen keys, enter the name ofthe workgroup in which you want theprinter to appear then press Save.c) You will be returned to the previousscreen. Press the SMB Host Namebutton. Using the touch panel keys,enter the desired text for this item thenpress Save.d) OPTIONAL STEP: Press the SMBHost Description button, enter thedesired text then press Save. You willbe returned to the previous screen.e) Press Save again to return to theprevious screen.6. Assign a Printer Name and Descriptiona) Press the Printer Description button.b) Press the Printer Name button, usingthe touch panel keys, enter thedesired text for this item then pressSave. Press Save again to return tothe previous screen.Before You StartIf your printer is equipped with a Token Ringinterface, use the Token Ring Quick InstallCard supplied in this Quick Install Card set toset the Ring Speed and Source Routing settingsfor your environment..Record the following information:Network Interface Type ___________________Workgroup Name _______________________SMB Host Name ________________________Printer Name ___________________________OPTIONAL INFORMATION:SMB Host Description ____________________Printer Description _______________________Go to the printer and...1. Connect your Document Centre to the net-work with the appropriate cabling.2. Enter the Tools pathwaya) Press the Access ( ) button.For assistance, contact your local Xerox Customer Support Center:USA: 1-800-821-2797 Canada: 1-800-939-3769

/ 2

Related manuals for Xerox Document Centre 240 LP