DocuMate 152 Scanner User’s Guide 25ScanningScan from the One Touch Button PanelYou can scan from the One Touch Button Panel on the screen.1. Adjust the paper guide for the width of paper and load thedocuments with their tops into the automatic document feeder.For Simplex (one-sided) scans, load the documents face down.For Duplex (two-sided) scans, the documents can be face up ordown because both sides are scanned.2. Now click on the One Touch icon in the Windows NotificationArea (at the bottom right corner of the screen).The One Touch Button Panel opens and shows the first five on-screen scanning buttons. Click the arrows to cycle through allnine settings.3. On the screen—not on the scanner—click the button you wantto use to scan.The scanner begins scanning. When the process finishes, thescanned images appear in the Destination Application, just as ifyou scanned with the Simplex or Duplex scanner buttons.The One Touch IconNOTE: Your scanner comes with nine factory-preset One Touchbutton settings. You can reconfigure and rename the buttons foryour specific scanning requirements.Click these arrowsto navigate throughthe nine buttons.Click the button youwant to use to scan.For example, if you want toscan with button 2, whichconverts the document toPDF, click here.Or if you want to scan with button 4,which attaches the scanneddocument to a blank email message,click here.
