Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Also see for Phaser 2135: Quick reference guide User guide Install guide Quick start guide Specifications

Contents

Xerox phaser 2135 Advanced Features And Troubleshooting Manual Manual pdf 25 page image

12 Phaser 2135 Color PrinterSelecting Print MediaSelecting Print MediaThis chapter will help you understand what kinds of paper and other print media to usewith the printer. The printer supports a variety of media types and sizes. Supported Media Types onpage 14 lists the sizes of paper, envelopes, and other print media for use with theprinter’s paper trays. The printer supports paper weights as follows: 60-163 g/m 2 (16-43 lb. bond) via the standard and optional paper trays 60-203 g/m 2 (16-54 lb. bond) via the Multi-Sheet Bypass Feeder 75-120 g/m 2 (20-32 lb. bond) for automatic 2-sided printing Media especially sensitive to curl (transparencies, labels, etc.) should be output to theside output tray at the left-side of the printer instead of to the top output tray. To use the printer’s automatic 2-sided printing capability: The optional duplex module must be installed. Only media with a weight from 75 to 120 g/m 2 (20-32 lb. bond) should be used.All other media weights must be manually duplexed. The paper tray must be one of the 550 sheet trays (Trays 1-5). If paper is fed fromthe Multi-Sheet Bypass Feeder, it will not be printed 2-sided automatically, butmay be printed 2-sided manually. Automatic 2-sided printing is only allowed when the Media Type is set to "PlainPaper" (75-90 g/m 2 , 20-24 lb. bond) or "Heavy Paper" (90-120 g/m 2 24-32 lb.bond). Do not attempt automatic 2-sided printing on any other type of media. Use only Xerox Phaser 2135 Transparencies.CautionOther transparencies may cause damage to the fuser. Any damage caused due tothe use of unsupported media may not be covered by your printer’s warranty.NoteUsing media not recommended for laser printers may result in paper jams, printquality problems or printer damage.Do not use the following media in the printer: Wrinkled, torn, or bent paper Moist or wet paper Curled paper Paper with an electrostatic charge Glued paper, or paper with gummed surfaces Paper with special coating Paper unable to withstand a temperature of 165º C (302º F)