Xerox work centre 7800 series Installation Manual

Appendix WorkCentre® 7800 SeriesCustomer Expectation and Installation Guide 25 Configure the Xerox WorkCentre PC drivers to use the IP address assigned to the Fiery Network Controller and to use Port 9200 to bypass the Fiery RIP fordirect printing to the WorkCentre Network Controller using Xerox Print driverPrint Quality and Color Management Print Resolution is 600x600x1, 1200x1200x1 and 600x600x8 dpi Pantone Calibrated ICC v4 Profile support Rich Black & Print Grays using Black onlySecurity FeaturesSecure Erase, IPSec, 802.1x, IPV 6, SNMPv3, MAC filtering, IP filtering/Port blocking, User Authentication, Certificate Management, SSL/TLS supportNetwork SwitchWhen the Fiery Network Controller is connected, it allows only one network drop with only one IP address (single IP) for the complete system (WorkCentre 7800 Series+ Fiery Controller). Certain EIP applications (Xerox Solutions applications or 3rd Party Applications, etc) are supported when in a single IP configuration. TheNetwork Switch can be added to allow the customer to still have one network drop with a two IP address configuration to support other EIP applications (XeroxSolutions applications or 3rd Party Applications, etc). This allows the EIP application direct access to the WorkCentre 7800 Series.Reference MaterialA complete set of virtual customer documentation is provided with the Fiery Network Controller. User documentation in other languages is also available at thefollowing link: http://services.efi.com/support/vfigs/9019710383/Software UpdatesPeriodically, Xerox will make available bug fixes and other software releases. The EFI option solution must have an Internet connection in order to take advantage ofautomatic s/w updates and insure the solution is maintained with the latest software and fixes. All software releases and bug fixes are designed to be customerinstallable from the Internet and it will be the customer’s responsibility to insure Internet access and perform the software upgrade activities.Print Quality and Color Management Print Resolution is 600x600x1, 1200x1200x1 and 600x600x8 dpi Pantone Calibrated ICC v4 Profile support Rich Black & Print Grays using Black onlySecurity Features Secure Erase, IPSec, 802.1x, IPV 6, SNMPv3, MAC filtering, IP filtering/Port blocking, User Authentication, Certificate Management, SSL/TLS supportReference MaterialA complete set of virtual customer documentation is provided with the Fiery Network Controller. User documentation in other languages is also available at thefollowing link: http://services.efi.com/support/vfigs/9019710383/Software UpdatesPeriodically, Xerox will make available bug fixes and other software releases. The EFI option solution must have an Internet connection in order to take advantage ofautomatic s/w updates and insure the solution is maintained with the latest software and fixes. All software releases and bug fixes are designed to be customerinstallable from the Internet and it will be the customer’s responsibility to insure Internet access and perform the software upgrade activities.Responsibility MatrixAction Customer XeroxInstall the WorkCentre XUnpack & install EFI Option /componentsXInstall the utilities, and printer driverson client PCs.XEnsure network configuration XConfirm network integrity X

/ 30

Related manuals for Xerox work centre 7800 series