August 20155-147Xerox® WorkCentre® 5890 Family PL 90.17Parts ListsPL 90.17 Developer Assembly (45-55ppm)Item Part Description1 – Toner dispense module (P/O PL90.17 Item 27) (REP 90.5)2 – Developer module (P/O PL 90.17Item 26) (See NOTE 1) (REP 90.2)3 – Retaining bracket (Not Spared)4 – Toner cartridge (REF: PL 26.11Item 3) (See NOTE 2)5 – Low toner sensor (Q93-310) (P/OPL 90.17 Item 13)6 – Registration/Developer biasharness (Not Spared)7 – Toner concentration sensor (Q92-601) (P/O PL 90.17 Item 2)8 – Not used9 – Not used10 – Not used11 – Stepped washer (Not Spared)12 – Washer (Not Spared)13 – Out of toner sensor kit (REF: PL31.13 Item 8)14 – Push on fastener (P/O PL 90.17Item 23)15 – Spring (P/O PL 90.17 Item 23)16 – Sleeve (P/O PL 90.17 Item 23)17 – Toner cartridge latch (P/O PL 90.17Item 23)18 – Not used19 – Trickle outlet shutter kit (REF: PL31.12 Item 3)20 – Shutter assembly (P/O PL 90.17Item 19)21 – Shutter spring (P/O PL 90.17 Item19)22 – Push on fastener (P/O PL 90.17Item 19)23 604K30560 Developer latch repair kit24 – Developer material (P/O PL 90.17Item 25, PL 90.17 Item 26)25 604K84590 Developer charge kit26 604K84570 Developer spares kit (includesdeveloper)27 – Toner dispense module kit (REF:PL 31.12 Item 1)NOTE: 1. To remove and replenish the developer material,refer to the developer charge kit, PL 90.17 Item 25.NOTE: 2. A waste toner bottle, PL 90.10 Item 1 is suppliedwith the toner cartridges.www MK-Electronic de
