Xilica Audio Design XTouch50 User Manual
                         | |
6Device ConnectivityXilica processors and control devices run on a network based infrastructure and are set upand controlled by a host computer using the Xilica Designer software.What’s in the Box• XTouch hardware device• Low voltage mounting bracketWhat you need to Provide• Computer• Network interface (Router, PoE switch)A router is used for IP assignment and easy connectivity to computer and control devices.A PoE switch is used to power XTouch controls.• Ethernet cablesAll wired connections use a standard RJ45 Cat 5/6 (Ethernet) connection.Connecting DevicesA network connection can be made between the computer and processor using:A) DHCP enabled Router or Server/Router combination (Recommended)With DHCP enabled routers and servers, the processor will automatically obtain the IP addressupon power up and connection. A router and PoE switch provides DHCP as well as power to theXTouch controls. Linksys routers and Netgear switches are recommended.B) A non-DHCP direct connection or indirect connection via an Ethernet switchWhen the processor is connected directly to a computer or indirectly via a switch/hub and DHCP isnot available, the connection process is not automatic. |
Related manuals for Xilica Audio Design XTouch Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine