3SYMBOLS USEDTOOLS REQUIREDINCLUDEDEQUIPMENT REQUIRED INCLUDED IN #389101Hobby Knife Side Cutters Needlenose Pliers Curved Scissors Hole Reamer2xSelf-tapping screws cut threads into the parts when being tightened. Excessive force may permanently damageparts when tightening screws. It is recommended to stop tightening when the part is attached or when someresistance is felt after the threaded portion enters the plastic.OvertightenedCORRECT WRONGThe threads are stripped.Micro ServoReceiverTransmitter Micro Motor 6-Cell MicroBattery PackBattery ChargerTransmitterBatteriesMicro SpeedControllerCA Glue Lexan Paint(Typically AA type) (Ni-MH recommended)Driveshaft Assembly Tool Hex Hub Assembly ToolAssemble asmany timesas specified(here twice)Cut offremainingmaterialCut offremainingmaterial from allplastic parts.Cut offshaddedportionEnsure smoothnon-bindingmovementApply instantgluePivot balltype usedPay attentionhereAssemble inthe specifiedorderAssemble leftand rightsides thesame wayPart bagsusedTrue-to-scalediagramCarorientationTighten screwgentlyPhillips Screwdriver 1.5mm Allen Wrench