Xray XB8E 2017 Instruction Manual

Contents

195. FRONT SUSPENSIONKICK UPROLL CENTER DOWNSTOPWHEELBASETRACK WIDTH901408SB M4x8909395SS 3.5x45909372SS 3.5x22353371SHIM 4x10x2All possible mounting alternativesof eccentric bushings3.5x22mm3.5x45mmThe tables below describe the amounts of kick-up, front track-width change depending on the combinationsof eccentric bushings used with 0 and 1mm, 1° offset. The 0.5mm, 0.5° represents the half change.* Not recommended to use this setting.NOT RECOMMENDED TO USE THIS SETTINGTRACK-WIDTH ROLL CENTERFF FFFR FR(mm) (mm)=308=306=310*=1=0=-1The XRAY alu front lower suspension holders provide even greater range ofadjustment for the front suspension. Using different combinations of eccentricbushings, fine adjustment of front kick-up, roll center, and front track-widthcan be obtained. For more information about the influence of kick-up, fronttrack-width, and roll centers on car handling, please refer to HUDY Off-RoadSet-up Book (#209099).Eccentric bushings have two different offsets from the center.Middle position = 0.5 mm or 0.5° from centerOuter position = 1mm or 1° from center➊➊➋➌➌➍➍➎4x8mmFRFF2mm2mm4mm4mm2mm2mm2mm2mm4mm4mmDETAILFRONT ARML=RDETAILCheck for free movementDETAILPush the arm from both sides to create playINITIAL SETTINGFF 0.5°1°INITIAL SETTINGFR 0.5°1°(HUDY #107634)ARM REAMERIf the suspension arms do not move freely,use a HUDY Arm Reamer to resize the holes.DETAIL0.0mmDOWNSTOP SETTINGDETAIL2.0mm Allen#902407Downstop screwfor fine tuning.INITIAL SETTING ALTERNATIVE SETTINGINITIAL SETTINGBOOKSET-UP