XtendLan DVR-470B User Manual

Also see for DVR-470B: User guide

Contents

XtendLan DVR-470B User Manual Manual pdf 9 page image

92.2.2 Run for the first timeWhen run for the first time, the system will remind that it is the first running and some relatedconfiguration must be set before starting the Server. There will be a system configuration dialogue afterthe confirm button being clicked, as showed below:Figure 2-5 the system configuration dialogueThe system configuration dialogue can be divided into the following three parts:1. The disc group configuration can add or delete disc partitions into or from the disc groups, and formator repair the partitions that have been allocated. The configuration of this part needs to be set reasonablyaccording the content of “2.1.1 the organization of the discs”. A disc, no matter whether it has beenallocated to a group or not, can be chosen, and be formatted or be repaired by clicking the “Format” or“Recover” button below the list box. Disc groups can be created/deleted by button “new group”/”delgroup”, disc group number is from 1 and so on, the maximum group amount is 26 and the 5 isrecommended.2. The NVR Server configuration can set the Server’s listen port, the max recording channels andwhether to check the record schedule. The system can operate on the Server remotely, such as start andstop the Server, set record plan, through the listen port.