Y-cam Cube YCW005 User Manual

Contents

Y-cam Cube YCW005 User Manual Manual pdf 57 page image

Page 576.8.2 Schedule SetupThe alarm that the motion detection triggers can be set to be active or inactive at certain times of the week.By default, the schedule is set to be “active” at all times “always”.However you can set the schedule not to trigger alarms at certain times (useful for instance if you don’t want alarms togo off while your office is open from 9am until 5.30pm). You can set up to 4 schedules, and you can use these to sendalarms to different places – such as emails, FTP or SD card.Schedule Setup Options[Schedule ID] Select the ID, you can save up to four schedules and use them for different purposes.[Everyday] Activate the alarm daily on specified times. Un-ticking this box will display the days of the week. (Seescreenshot)[Always] Alarm is always activated.[Range] Activates the alarm on specified times.[Except] Deactivates the alarm during time specified.[Start time] Start time of the alarm.[End time] End time of the alarm.Click Apply to confirm your setting.