YASKAWA CIMR-AC2B0004 Quick Start Manual

Contents

YASKAWA CIMR-AC2B0004 Quick Start Manual Manual pdf 18 page image

EN 18 YASKAWA ELECTRIC TOEP C710606 48A - AC Drive A1000 1000Hz Software - Quick Start Guide4 Keypad Operation4 Keypad Operation Digital Operator and KeysThe digital operator is used to program the drive, to start/stop it, and to display faultinformation. The LEDs indicate the drive status. Keys and FunctionsKey Name FunctionFunction Key(F1, F2)The functions assigned to F1 and F2 vary depending on the menu that is currently displayed. Thename of each function appears in the lower half of the display window.ESC Key• Returns to the previous display.• Moves the cursor one space to the left.• Pressing and holding this button will return to the Frequency Reference display.RESET Key • Moves the cursor to the right.• Resets the drive to clear a fault situation.RUN KeyStarts the drive in the LOCAL mode.The Run LED• is on, when the drive is operating the motor.• flashes during deceleration to stop or when the frequency reference is 0.• flashes quickly the drive is disabled by a DI, the drive was stopped using a fast stop DI or a runcommand was active during power up.Up Arrow Key Scrolls up to display the next item, selects parameter numbers and increments setting values.Down Arrow Key Scrolls down to display the previous item, selects parameter numbers and decrements settingvalues.STOP Key Stops drive operation.ENTER Key • Enters parameter values and settings.• Selects a menu item to move between displays.LO/RE SelectionKeySwitches drive control between the operator (LOCAL) and the control circuit terminals(REMOTE). The LED is on when the drive is in the LOCAL mode (operation from keypad).ALM LED LightOn: When the drive detects a fault.Flashing:• When an alarm occurs.• When oPE is detected.• When a fault or error occurs during Auto-Tuning.LOREF2F1ESCRUN STOPENTERRESETALMDIGITAL OPERATOR JVOP-180F1F2ESCRESETRUNSTOPENTERLOREALM