YASKAWA CIMR-VC series Quick Start Manual

Contents

YASKAWA CIMR-VC series Quick Start Manual Manual pdf 38 page image

EN 36 YASKAWA Europe TOEP C710606 15C YASKAWA AC Drive - V1000 Quick Start Guide8 Instructions for UL and cUL8 Instructions for UL and cUL UL Standards ComplianceThis drive is tested in accordance with UL standard UL508C, File No. E131457 and com-plies with UL requirements. To ensure continued compliance when using this drive in com-bination with other equipment, meet the following conditions: Installation AreaDo not install the drive to an area greater than pollution severity 2 (UL standard). Main Circuit Terminal WiringYaskawa recommends using UL-listed copper wires (rated at 75°C) and closed-loop connec-tors or CSA-certified ring connectors sized for the selected wire gauge to maintain properclearances when wiring the drive. Use the correct crimp tool to install connectors per manu-facturer recommendation. The following table lists a suitable closed-loop connector manu-factured by JST Corporation.Closed-Loop Crimp Terminal Size (JIS C 2805) (same for 200 V and 400 V)Wire Gaugemm2(AWG)Terminal Screws Crimp TerminalModel NumberTightening TorqueN"m(lb"in.)0.75(18)M3.5 R1.25-3.5 0.8 to 1.0(7.1 to 8.9)M4 R1.25-4 1.2 to 1.5(10.6 to 13.3)1.25(16)M3.5 R1.25-3.5 0.8 to 1.0(7.1 to 8.9)M4 R1.25-4 1.2 to 1.5(10.6 to 13.3)2(14)M3.5 R2-3.5 0.8 to 1.0(7.1 to 8.9)M4 R2-4 1.2 to 1.5(10.6 to 13.3)M5 R2-5 2.0 to 2.5(17.7 to 22.1)M6 R2-6 4.0 to 5.0(35.4 to 44.3)