YASKAWA GPD 505/P5 Troubleshooting Manual

Also see for GPD 506/P5: Technical manual

Contents

PP.P5G5.03.TroubleshootPage 38Rev. 06/11/2003Fault CodesParameter Setting Error - Inverter can’t run. The fault is displayedon the digital operator, and the fault relay is not activated.OPE11FC/ On-Dly Carrier frequency data setting fault.Upper limit (C6-01) >5KHz, and the lower limit(C6-02) <= 5KHz.Carrier frequency proportional gain (C6-03) > 6 and(C6-01) < (C6-02).N/APossible Cause(s): Parameter setting incorrect.Corrective Action: Check the program settings and correct the errors.Possible Cause(s): Connection not made properly, user software not configured to theproper baud rate or configuration.Corrective Action: Check all connections, verify all user side software configurations.CALLSerial Com Call Serial communication transmission error.Communication has not yet been established.call505506 515 √505506 √ 515 √