YASKAWA JEPMC-OP3C01-E Instructions Manual

YASKAWA JEPMC-OP3C01-E Instructions Manual Manual pdf 26 page image

3 InstallationE-243.4 Installing an Option ModuleUse the following procedure to install an Option Module.1. Hold the top and bottom of the Option Module to be installed, lineup the Module with the left side of the guide rail inside the optionslot, and then insert the Module straight in.2. After the Option Module is completely inserted, place your hand onthe front of the Option Module and press the Option Module firmlyuntil it mates with the Mounting Base connectors in the Unit. Thefront of the Option Module and the tabs will be aligned if the OptionModule has been installed properly.3. Place the hole on the bottom of the panel of the Option Module ontothe tab on the bottom of the Unit. Next, hook the hole at the top ofthe panel of the Option Module onto the tab on the Unit.This completes the installation procedure.CN13CN12EthernetLINK/ACT100MRDYRUNALMERRM-ALMLIO-0LD1LD2LD3LD4MODEI/OLD5LD6LD7LD8CN13CN12EthernetLINK/ACT100MCNCN176CN2ACN2BCNRDYRUNALMERRM-ALM