YASKAWA JVOP-KPLCB04AxB Installation Manual

5 Installation ProcedureYASKAWA TOEPC7306000BA HOA Keypad Installation Manual 15Table 5.1 Keypad Installation MethodInstallation Method Features Necessary Tools andInstallation SupportSetsOutside of the controlpanelSimplified installation ispossible. Separateinstallation support sets arenot necessary.Phillips screwdriver #2(M3)Inside of the control panel Keypad does not extendfarther than the front of thecontrol panel.• Phillips screwdriver #2(M3, M4)• Installation support setA (for mounting withscrews, model: 900-192-933-001)• Phillips screwdriver #2(M3)• Wrench (M4)• Installation support setB (for mounting withnut clamp, model: 900-192-933-002)Note:Installation support sets are sold separately. If there are weld studs inside thecontrol panel, use installation support set B. Contact Yaskawa or your nearest salesrepresentative to make an order.NOTICE Do not let unwanted objects, for example metalshavings or wire clippings, fall into the drive during drive installation. Put atemporary cover over the drive during installation. Remove the temporary coverbefore start-up. Unwanted objects inside of the drive can cause damage to thedrive.■ Optional ItemsThe optional extension cable and installation support set arenecessary for Internal/Flush-Mount installation.Contact Yaskawa or your nearest sales representative to orderoptional items.