YASKAWA MP3000 Series User Manual

Also see for MP2000 Series: User manual User manual User manual User manual Driver manual

Contents

YASKAWA MP3000 Series User Manual Manual pdf 108 page image

2.5 Communications with a Touch PanelUsing Automatic Reception with the MP3000 as a Slave2-902.5 Communications with a Touch PanelWhen using Ethernet communications between the MP3000 and a Touch Panel from Digital ElectronicsCorporation, use the Extended MEMOBUS protocol as the communications protocol. The ExtendedMEMOBUS protocol allows the master to read and write the slave registers.This section describes communications when the MP3000 acts as a slave.Using Automatic Reception with the MP3000 as a SlaveThis section describes how to communicate with a Touch Panel from Digital Electronics Corporation byusing automatic reception.Note: You can also use the MSG-RCVE function to communicate.For information on the communications settings for using the MSG-RCVE function, refer to the following section.2.4 Communications with MP-series Controllers− Using the MSG-SNDE Function with the MP3000 as the Master(page 2-51)EthernetEthernetMP3000218IFDMP3000(local station)SlaveMasterCommunications Protocol Extended MEMOBUS protocolConnection Type TCP or UDPData Code Binary or ASCIIAutomatic reception(no ladder programming)GP3000-seriesTouch PanelExtended MEMOBUS protocolTouch Panel(remote station)