YORKVILLE 50KW Owner's Manual

Also see for 50KB POWER COMBO: Parts list Owner's manual Owner's manual Service manual Service manual

Contents

EFFECTS LOOPThe EFFECTS LOOP can be used to insert signals from external sources such as a DigitalEffects Unit or Equalizer into the signal path. The loop is inserted after the tone and vol-ume controls. To use the EFFECTS LOOP connect the EFX SEND jack to the input of theequalizer or effects unit. Connect the output of the equalizer or effects unit to the EFXRTN jack to complete the loop.LINKING TOGETHER MULTIPLE WEDGESWhen the Yorkville 50KB/KW is used with a line level input for stage monitor purposes,it’s possible to link together several units by using the inputs on Channel 2. Insert themixed signal from a mixing console into either of the two phone jacks (on Channel 2). Itis possible to use the remaining phone jack input on Channel 2 as an output to link toanother Yorkville 50KB/KW.Please note: that only information being sent to the input of Channel 2 will be linked.PHONESHeadphones can be connected to the Yorkville 50KB/KW by inserting a headphone pluginto the PHONES jack located on the front panel. While headphones are connected, theinternal speaker is disconnected. Always use stereo headphones. The audio heardthrough stereo headphones will be a mono signal separated into the two earpieces.Caution: Always exercise caution when using headphones to avoid permanent hearing loss.POWER SWITCHWhen the Yorkville 50KB/KW is turned on, the LED beside the power switch will beilluminated.2SPECIFICATIONSJack Config SensitivityChannel 1 Input one XLR jack <3 mVrmsone phone jack <10 mVrmsChannel 2 Input two phone jack <100 mVrmstwo RCA jacks <100 mVrmsEffects Send phone jack 1 VrmsEffects Return phone jack 1 VrmsSpeaker ComponentsWoofer 10", 4-Ohm, 50 WattTweeter 3.75", 8-OhmPower Rating >70W, 4-Ohm load, 1 KHz, 2 cycle burst>50W, 4-Ohm load, 1 KHz, continuous at 5% THD* Measurements made with regulated power supplyConstruction 7-Ply Poplar Plywood with internal bracingExterior Finish Blue/black carpet with plastic cornersDimensions 50KB: 15.5"x11.9"x16" (HWD)40cm x 30cm x 41cm (HWD)50KW: 18.5"x16"x15.5" (HWD)47cm x 41cm x 40cm (HWD)Power Requirements 120V AC 60Hz 0.3A230V AC 50Hz 0.15A