Storing the IDS WA-S adapter IDS WA System18 ba76199e03 08/20184.3 Status LEDs of the IDS WA-S adapterThe IDS WA-S adapter on the sensor indicates its operating condition with coloredLEDs.5 Storing the IDS WA-S adapterFor storing, put the IDS WA-S adapter with the sensor connected into a IDS WA-SCharger ready for operation.The battery of the IDS WA-S adapter is automatically recharged when the chargebecomes less. Thus the wireless sensor is ready for operation at any time.The IDS WA-S Charger ready for operation can also be used for storing thewireless sensor for longer periods of time.This indicating can be switched off in the Sensors menu.Color Status MeaningGREEN Flashes Data are exchanged between the sensor and meter.The LED flashes during each data exchange.You can switch off the flashing by selecting the connectionstatus in the Sensors menu.RED FlashesonceThe sensor is identified.The function is started for the selected sensor in the Sensorsmenu with .BLUE FlashesonceThe measured value was stored in the meter with the functionkey of the IDS WA-S adapter and transferred to an interface.BLUE Flashes A measurement with AutoRead was started with the functionkey of the IDS WA-S adapter.Off - No data exchange, no connectionTo store the wireless sensor outside the charging station for longerperiods of time, we recommend you store the IDS WA-S adapter andsensor separately.