YUNEEC MantisQ User Manual

Also see for MantisQ: Quick start guide Quick start guide

YUNEEC MantisQ User Manual Manual pdf 9 page image

INSTALLING THE SMART DEVICESD CARD INSTALLATIONPOWRING ON/OFFSTEP 3: Push the flight battery into the aircraft until hearing a 'click'.STEP 1:Pull out the smartphone holder fromthe remote controller.STEP 3:Connect the smart phonewith the remote controllerthrough the iPhone orAndroid cable.STEP 2:Put your smart phoneon the holder.Press the power button and hold for two seconds to power on/off the remote controller and the Mantis Q inturn. When the main LED flashes blue slowly and emits a rising tone, the aircraft completes its initialization andboots up successfully.Power on your smart phone, scan the QR code and download the Yuneec Pilot APP on your smart phone.09NOTICE: Before using the Mantis Q, a Micro SD card should be insertedinto the camera.NOTICE: Do not move the Micro SD card from the Mantis Q when it isshooting.STEP 1: Slide the memory card into the card slot according to thedirection of the arrow.STEP 2: When fully inserted, the card clicks into place. To remove thecard, place your fingernail against the edge of the memory card andlightly press it further into the Micro SD card slot. The card springs outfar enough to be removed.CAUTION: Keep the memory card out of the reach of children to preventswallowing.WARNING: After inserting the Micro SD card in the computer, be sure tosafely eject the SD card properly so it does not corrupt the card. If youdirectly pull out the Micro SD card from the computer and plug it intothe aircraft, the aircraft with this Micro SD card won’t support the digitalvideo downlink, and the photo taking and video recording function cannot be performed.